Product Name：PhireGuard BDP

Time：2019-6-28 17:27:00

Product Details

P content %wt: 9
Relative density @20℃ : 1.26
Viscosity @70℃, mPa: 160
Acid value, mgKOH/g: < 0.1
Moisture, %wt: < 0.05
Color, APHA: < 100
Tga5% wl loss, ℃ : 329

Physical properties: colorless/light yellow transparent liquid

General description and application
PhireGuard BDP is a halogen-free flame retardant with low polyphosphate. It is based on bisphenol A and diphosphate as monomers. PhireGuard BDP is particularly suitable for engineering resin alloys, including PCIABS and pox-ppe /HIPS for electrical and electronic accessories.
PhireGuard BDP does not require any synergist (usually antimony oxide), so it has good circulation. In addition, it has good low volatility and thermal stability in the production process of most engineering thermoplastic resins. Due to the apparent fluidity of PhireGuard BDP can be produced in thin-walled molds. Finally, its hydrolysis resistance is superior to other flame retardants.

Safety instructions
If in direct contact with eyes or skin, rinse immediately with plenty of water and seek medical advice. If ingested accidentally, rinse mouth immediately and seek medical advice. In any case, please wear appropriate protective clothing and carefully refer to the product safety data sheet before using this product.

Handling and transportation
This product can be loaded in containers (maximum. 25 tons), ton boxes (1000 liters) and drums (200 liters and 155 U.S. gallons).
Products must be kept in a dry, cool place, away from the sun and away from moisture and water pollution. Please follow good sanitary and safety procedures when handling and use in a ventilated place. To prevent leakage, store inert materials in chemical waste containers. Prevent leakage into water and waterways.

The Last One：PhireGuard TPP
Next Item：4, 6-dichlorouracil

Return